From 9:45 to 10:30, I prepared for the rotational movement on the drawing surface. From around 17:55 to around 19:15, it's a continuation of numerical input. The object movement this time may be a little faster. I ordered a pizza 6 cut size. I asked him to change the thickness of the bread. The flavors of grilled vegetables and basil matched.
From around 14:00 to around 14:35, I visited about 3 reference sites for PC work. Let's go around a little more. From around 19:40 to around 21:30, I created shortcuts and entered branch languages and numerical values in them. Continuation of yesterday's production part. I think my understanding of patterns has improved a little.
For PC work, I made a branch input of the operating language from about 8:00 to 8:30. About 6 types of movement patterns could be planned. You entered the numbers for about 20 minutes from around 18:25. I challenged to move an object. I wonder if there are many tries until success ... For the time being, this work is done so far.
From around 7:40 to around 9:15, the old png files were newly adapted into groups of 5 for PC work. Grouping will be around here for the time being. I tested pasting png files for about 20 minutes from around 13:40. I was struggling with an error and was interrupted. From around 19:20 to around 20:15, after the pasting error was corrected, I entered numerical values and branched in the operating language. Conditional expressions also have overlapping parts. It's a complicated place, but I want to proceed while thinking about it.
PC work is from 6:30 to 7:25, and the first half of the work is rewriting yesterday's test file. In the latter half of the work, I created one png file. From around 14:45 to 15:30, I entered numbers in the Atom editor. Input the drawing surface from 19:05 to 19:45. There were some parts that I had forgotten after a long time (sweat). From around 20:30 to around 21:00, the old PNG files were newly grouped into 5 pieces as in the afternoon. There is a little amount of grouping, so I will do it again next time.
From around 19:10 to around 19:40, I remade the past paint png files and created two PC work. From around 20:10, I created a new test file for about 10 minutes and prepared the horizontal and vertical axes. Then I wrote a letter and tried to move it. I faced an error and decided to withdraw, but I felt that the input on the drawing surface did not come for a long time.
I worked on the PC from 8:15 to 10:40. Fixed the error that occurred yesterday. However, as I was working on it, I faced another part of the error. I took a detour. I tried to add decorations and connected links. From around 19:45, I worked on improving the error for a few minutes. I was troubled with the issues myself, but I am happy that I was able to improve.
For PC work, I adjusted the layout of characters and buttons from around 7:40 to around 9:10. From 9:40 to 11:05 and from 16:55 to 18:30, I worked with pigpawcastle. I got an error when displaying the file, or the button did not respond, so I would like to try again.
PC work is less than 5 minutes from around 18:30, but I worked on it. I tested the one introduced yesterday. Then I verified and confirmed the timer. Confirmation was okay. From around 19:00 to around 21:05, I created a new file and wrote character input and decoration. I got an error on the way, but I got over it.
For PC work, I corrected the drawing surface from about 6:40 to about 9:05. I didn't know that the overwriting would get darker each time. This time I'm glad I knew. So, I created and introduced an eraser-like shortcut before overwriting. Halfway through. From around 19:30 to around 20:15, I did the rest of the work for the down key in the first half of the work. I was relieved because I managed to do it. In the latter half of the work, we prepared up / down / left / right arrow click buttons and created a shortcut for clicking.
From around 5:00 to 7:10, I worked on the PC until I finished inputting the upper key of the numerical value input. From around 8:30 to around 10:45, I continued to input numerical values. I worked until I finished typing the right key. When I tried it, the left key and the right key used the technique, and I was able to shorten some of the details, but the up key seemed to take a lot of input, maybe it took a long time. So I expect it to take the down key too (sweat). From around 14:25 to around 16:35, I worked on numerical input halfway. It was cloudy, so the temperature was cool. I was able to concentrate.
PC work was divided into three sets. I worked on the continuation of yesterday from about 1:55 to about 50 minutes, from about 5:45 to about 50 minutes, and from about 18:25 to about 50 minutes. I continued to input the numerical values. Of the up / down / left / right keys, I was able to input the language of the left key to the end, so the ratio is 1/4.
From around 3:15 to around 5:20, I worked on the PC by cutting some sentences because the required width and the unnecessary width came out by yesterday's width adjustment. From around 14:10 to around 15:20, I entered the width value data.
For PC work, I input the width adjustment of the drawing surface from about 11:50 to about 13:45. I ordered a pizza delivery service for the first time in a while. I ordered one Margherita and the other with vegetable pizza in 6 cut size. Thanks to the thick cheese, I got a feeling of fullness.
From 5:30 to 6:25, I modified the drawing surface based on the paint png that I had made in the past. From around 14:20 to around 15:50 and from around 19:10 to around 20:30, I entered the branch of the operating language. It rained every day and it was sunny after that, so I want to get in shape again and do my best.
PC work continued from yesterday's input work from around 8:45 to around 10:10. From 17:20 to 18:05, the first half of the work was completed this morning. In the second half, I increased the corresponding key by one and wrote the language. I've completed the planned location, so I'd like to summarize my thoughts. I would like to summarize my thoughts and continue later. Around 10:40, I went to Gusto and took out a daily lunch. Today's menu is hamburger steak, lettuce cut salad, chicken grilled vegetables and tomato sauce. The tomato sauce has already flowed to the bottom, but I'm hoping that the hamburger next door will taste better (laughs). I also want to soak the cut salad in the sauce and eat it. I ordered a large serving of rice. But I thought I wouldn't be able to eat it. In the end, I was able to finish the large serving of rice thanks to the hamburger steak.
From around 1:45 to around 3:05, I created multiple small drawing surfaces and adjusted the width on the Atom editor side. From around 10:45 to around 15:15, I worked on the branch input of the operating language with a break on the way. I think I've made some progress. I was curious, so I looked up the template for the weather forecast lines. I thought that the weather, temperature, and probability of precipitation were "well, it's essential", but there were various formats such as UV information and laundry information. I was surprised.
From around 3:45 to around 5:15, I checked for malfunctions and corrected parts when I pressed a key. From around 8:05 to around 8:55, I made a little practice file and challenged the practice problem of the repetitive system of the operating language. I couldn't solve it, but I wonder if it became a brain teaser. I would like to do my best if I have the opportunity to challenge next time.
From around 3:35 to around 5:05, I was working on the PC for inputting the branch of the operating language that I usually do. From around 8:30 to around 10:30, I created a shortcut and incorporated a part of the previous work. From around 16:20 to around 18:30, I fixed some strange movements in the operation test.
PC work is from 0:20 to 2:10, branch input of operating language. I was a little sick, so I stopped. I slept a little, so I worked on the continuation from around 3:55 to around 5:20. The branch language is set up and it is the flow of the operation test. When I pressed the up key, I confirmed the malfunction that the left responded or did not respond, and corrected it each time. From around 8:35 to around 10:15, we introduced a timer. Around 10:30, I took out a daily lunch on Thursday in Gusto. We had a large serving of rice, a hamburger steak with tomato sauce, a pumpkin croquette, two shumai dumplings, and a side dish of edamame and corn. Among them, I was interested in shumai. It contained minced meat, shiitake mushrooms, and chopped ginger. I saw a black umbrella, so at first I wondered if there was a wood ear. The ginger had a nice flavor. Thank you for the meal.
I started working on the PC all night from 1:00 to 2:25. I was typing keys, but I worked on fixing the wrong part of the width position or language. From around 3:25 to around 5:45, I made a good break in the continuation of the correction work. In the future, maybe one more png will be added, so I'll do my best. During the day, I worked on three sets: about 100 minutes from around 11:55, about 95 minutes from around 14:00, and about 95 minutes from around 16:00. The branch of the operating language has progressed moderately. As I proceeded, as expected, I devised a way to reduce the number of pngs used by two and increase by one. It was raining when I turned the curtains to water Pachira around this morning, so let's leave it to me (laughs).
I worked on the PC from around 5:40 to around 7:25. The main task is to combine width correction using small png and conditional branching. After inputting the width adjustment, if the result is as expected, I feel a little happy.
From 0:30 to 1:50 and from 5:10 to 6:10, I used the Atom editor to input the branch of the operating language. I've been doing the same work for a few days now, but it looks like it's still going on. Is it the most difficult to adjust the width of small png?
I worked on the PC from around 4:50 to around 6:40. I made something like a command box. Originally I was thinking of using the characters and buttons written there as a single item, but I wanted to be able to display them depending on the situation, so I decided to repair it. There were many characters I wanted to correct, so I tried using the replace function. I found this very convenient because the characters with about 900 lines were rewritten on the test file side. About 10 minutes from around 6:45, I found a gif file that moved too fast, so I corrected about two. From around 13:05 to around 15:20, I slowly worked on the data rewriting work. I think it was great that the error could be corrected.
PC work was about 25 minutes from around 0:20 and about 50 minutes from around 2:00, and the first half was the creation of shortcuts and the input work that continued from yesterday. In the second half, I concentrated on input work. I was able to solve it yesterday by key input, but the next hurdle still stands up. We also incorporated log confirmation. However, probably because I took in a lot, half of the screen was filled with characters in 1 second ... I took a walk for about 45 minutes from around 10:30. I asked for the vanilla flavor of soft serve ice cream on the way. It was sweet and delicious. Even though I decided on a distant route, I was able to walk reasonably well. It was good that it was sunny.
I worked on the PC from 2:00 to 3:25 and from 4:15 to 5:10. We continued to work on branching and key input of the operating language. In the latter half of the work, key input stopped working and I couldn't come up with a solution, so I stopped. For a few minutes from around 22:00, I modified a part of the small png created in the past (because it was difficult to see due to the color tone with the background).
I worked on the PC from around 3:00 to around 5:30. I wrote a branch of the operating language. I think I'm getting used to the arrow key input. If you press the up key, the left will react ... Is it little by little? From around 6:55 to around 8:30, I worked on the first half and the second half separately. The work in the first half of this period is the correction of the work done in the previous time. In the latter half of the work, an error occurred and stagnated in the next work. From around 21:20 to around 21:40, we dealt with errors around 7 am. Rewritten several times to solve the problem. something like that. Around 10:30, I took the train and went to the Sanuki udon shop to eat udon. On the menu, there was udon noodles with vegetables collected in the mountains. I ordered the average size of this. Udon was more impressive with its chewy texture.
I wanted a memo from 2:00 to 3:40 for PC work, so I wrote a memo of the symbol. From around 6:00 to around 8:20, my work went back to the Atom editor and keyed in. There is a slight deviation in the input work for each button, so I would like to fix it again. I worked from around 20:50 to around 21:30. I input the command style of 3 steps and color-decorated the part. At my home, several slugs sometimes invade the bath. I was wondering if there was an egg somewhere.
PC work continued key input from around 3:20 to around 3:55. It's a bit of a struggle. I used the word in the morning and at night to make a memo of the symbol halfway, but I worked on it in several times (change of strategy). I worked on it from 8:35 to 10:40, from 20:05 to 21:40, and from 22:30 to 45 minutes. I used the memo pad to fill out the form. I didn't write only the letters, but the amount of work exceeded 23 pages.
PC work started around 11:25 for about 15 minutes, and created about 4 small pngs. Then I did a display test on the Atom editor side. From around 17:55 to around 20:50, I mainly practiced key input. I was able to display a few characters, but when it came to the arrow keys, I couldn't stand my teeth ... When I bought more food yesterday, I bought a dessert called "Mochimochi Crepe Matcha". It seems to be refrigerated, but I kept it in the freezer. I took it out this morning. And I got it. It looks like a square crepe with matcha-flavored cream (I'm a sherbet-like cream) and dark green matcha bean paste inside. However, the area was not small. Yeah, when I chewed it, it had a chewy texture. Specifically, I felt that the thickness of the crepe pheasants around the knot at the bottom of the package made it more chewy. Thank you for the meal.
From 2:30 to 3:30, I worked on the third piece of the drawing surface on the PC. I checked it later. It was the process with the most details. From around 10:05 to around 11:15, the work on the 3rd and 4th sheets, which had been in the middle of the process, was completed. From around 13:20 to around 16:35, I worked on the fifth piece. This may have been the top class in terms of the amount of characters. From around 20:25 to around 21:05, I created a practice file and practiced keyboard input. There was a table called key code, which helped me. From around 21:45 to around 22:35, I drew additional parts in the png file. I am learning key input practice with a little passion (laughs).
前のページに戻る BackPage
前のページに戻る BackPage